top of the page

Spear-Shaped Flat Models: Differences Between the Prestige, Special, Diamond, and Concord Series

Nov. 3
A 5-minute read

Spear-Shaped Flat Models: Differences Between the Prestige, Special, Diamond, and Concord Series

Mızrak MakineWithin its line of horizontal circular saws—also referred to in the industry as “horizontal circular saws with a cutting blade”—the company offers the Prestij, Special, Diamond, Diamond S, Diamond SX, and Concord series, designed to meet various production needs.

Mızrak Makine Horizontal Circular Saws with Cutter Series

Although the series share the same basic cutting principle, they differ in terms of slide length, aluminum carriage width and structure, the level of automation of the saw movements, motor power, and additional equipment.

For this reason, when comparing horizontal circular saw models, it is not enough to simply consider whether the machine is manual or automatic. The dimensions of the panels to be processed, production volume, how often the saw settings are adjusted, the carriage design, and the required level of automation must all be evaluated together to determine the right model.


Mızrak Prestige Series

The Mızrak Prestige Series consists of horizontal circular saw models with a rip fence, where saw movements are performed manually. The up-and-down movement of the saw assembly and angle adjustment between 45 and 90 degrees are performed mechanically by the operator.

The Prestige series features a 390-mm-wide aluminum track and an 8-mm track system. One of the series’ most notable advantages is its wide range of track options. With track lengths of 1,500, 2,200, 2,800, 3,200, and 3,800 mm, it offers alternatives for various work areas and panel sizes.

Mızrak Makine Prestige Series

From manufacturing operations that process smaller parts to furniture workshops that cut standard sheet sizes, various businesses can choose the slide length that best suits their needs.

For businesses that do not frequently adjust the saw’s height and angle settings, where manual operation is sufficient, and that are seeking more economical solutions, the Prestij series is the most basic option in the Mızrak horizontal circular saw product line.


Mızrak Special Series

The Mızrak Special Series offers a semi-automatic design that combines manual and automatic saw movements.

On Special models, the up-and-down movement of the saw unit is manual, while the angular movement between 45 and 90 degrees is motor-driven. Thus, in production settings where angled cuts are frequently made, motor-driven movement is used instead of adjusting the saw unit’s angle with a hand wheel.

Mızrak Makine Special Series

The series uses an aluminum carriage that is 450 mm wide and offers slide options ranging from 3,200 to 3,800 mm.

The Special model stands out not only for its wider frame compared to the Prestij but also for its motorized angle adjustment. As a result, it serves as a suitable middle ground for businesses that prefer greater ease of use over a fully manual system but do not require all of the saw unit’s movements to be automated.


Mızrak Diamond Series

The Mızrak Diamond Series is divided into three models: Diamond, Diamond S, and Diamond SX. To put it simply:

  • Diamond: Manual saw movements

  • Diamond S: Chainsaw movements

  • Diamond SX: PLC-controlled positioning and advanced automation

While the manual design of the saw’s movements is retained in the entry-level models retain a manual design for saw movements, but differ from the Prestige Series in their carriage system.

On Diamond models, the up-and-down and 45–90-degree movements of the saw unit are performed manually. In contrast, the series uses a 435-mm-wide aluminum carriage and a 9-mm special-support carriage system.

Mızrak Makine Diamond Series

The Diamond series offers slide options of 2,800, 3,200, and 3,800 mm.

For this reason, the difference between the Prestij and Diamond models is not merely a matter of model name or slide length. Although the saw movements are manual in both series, the Diamond features a specially supported carriage system with a 435 mm / 9 milli stroke, compared to the 390 mm / 8 milli stroke in the Prestij.

For businesses that want a more advanced machine design but prefer manual saw adjustments, the Diamond series stands out.


Mızrak Diamond S Series

Diamond S is one of the versions of the Diamond family that features an enhanced level of automation.

On Diamond S models, both the up-and-down movement and the angular movement (between 45 and 90 degrees) of the saw assembly are motor-driven. The operator controls the saw’s movements via the control panel rather than using hand wheels.

Mızrak Makine Diamond S Series

The series includes a 450-mm-wide aluminum carriage and a 9-mm special-support carriage system. The Diamond S is available with 3,200- and 3,800-mm slide options.

This design combines the Diamond series’ powerful machine system with greater ease of use. In particular, in production settings where saw height and angle adjustments are frequently changed throughout the day, the motorized movement system can help the operator complete these adjustments more quickly.


Mızrak Diamond SX Series

The Diamond SX is the series in the Diamond family that takes automation to the next level.

While the saw movements on the Diamond S are motor-driven, the PLC screen on the Diamond SX allows the target saw angle and height to be entered directly into the system. This enables the operator to define the desired position for the machine, rather than simply starting the movement and stopping it at the correct value.

Mızrak Makine Diamond SX Series

For example, when a specific angle value is entered, the saw group can automatically position itself to the target angle. Similarly, the saw height can also be adjusted according to the value set via the PLC.

The Diamond SX series features a 450-mm-wide aluminum carriage and a 9-mm special-support carriage system. The models, available with 3,200- and 3,800-mm slide options, can be equipped with additional automation systems—such as a servo-controlled rear guard—in addition to the saw’s movements.


Concord Series Spears

The Mızrak Concord Series combines automatic saw movements with higher main motor power and additional production equipment.

On Concord models, the saw unit’s up-and-down movements and movements between 45 and 90 degrees are performed automatically. The series uses a 9-millimeter aluminum carriage system with a width of 450 mm and offers slide options ranging from 3,200 to 3,800 mm.

Mızrak Makine Concord Series

One of the key features that sets the Concord series apart from others is its 5.5 kW / 7.5 HP main saw motor. In addition, it includes additional features that support the production process, such as a design compatible with Ø400 mm saw blades, a pneumatic clamping device, automatic lubrication, and a dust extraction system.

For this reason, Concord positions itself as an option not only for businesses that require only automated sawing operations, but also for manufacturers who need higher motor power and additional auxiliary equipment—particularly those working with thick, unprocessed raw materials.


Key Differences Among Horizontal Spear-Shaped Circle Models

The key differences between the series in the spear-to-circle comparison can be summarized as follows:

Series

Car Width

Sled Options

Up-and-Down Movement

45–90° Range of Motion

Key Feature

Prestige

390 mm

1,500 / 2,200 / 2,800 / 3,200 / 3,800 mm

Manual

Manual

8 national car systems and a wide selection of sleds

Special

450 mm

3,200 / 3,800 mm

Manual

Automatic

Semi-automatic design and spacious car

Diamond

435 mm

2,800 / 3,200 / 3,800 mm

Manual

Manual

9 domestically developed car systems with special support

Diamond S

450 mm

3,200 / 3,800 mm

Automatic

Automatic

Chainsaw height and angle adjustments

Diamond SX

450 mm

3,200 / 3,800 mm

Automatic

Automatic

PLC displays and advanced positioning systems

Concord

450 mm

3,200 / 3,800 mm

Automatic

Automatic

7.5 HP main motor and additional production equipment

Differences Between Horizontal Lathes with Manual and Automatic Feed Mechanisms

Which Spear-Rest Circle Model Should You Choose?

The right choice among horizontal circular saw models depends on the company’s production structure, the dimensions of the panels being processed, the variety of cuts being made, and the level of automation required.

For businesses that do not frequently change saw settings and where manual operation is sufficient, the Prestij is a good option; for manufacturers seeking a manual solution with a more advanced carriage design, the Diamond is worth considering.

For businesses where motorized angle adjustment is sufficient, the Special model is the right choice; however, if both the height and angle adjustments of the saw group need to be automatic, the Diamond S stands out.

PLC settings for target angle and saw height

The Diamond SX may be the preferred choice if direct access via RAN is required and more advanced positioning features are desired.

For production processes where higher main motor power, pneumatic pressure, automatic lubrication, and similar additional equipment are a priority, the Concord series may be worth considering.

For this reason, when comparing horizontal circular saw models with spear-type feeders, one should consider not only price or slide length, but also the machine’s width and structure, the level of automation of the sawing operations, motor power, production capacity, and any additional features required.

Merkez Makine including the Prestij, Special, Diamond, Diamond S, Diamond SX, and Concord series, designed to meet various production needs Mızrak horizontal circular saw models to meet various production needs. You can review the spear-type horizontal circular saw model that suits your production capacity via the link below, or contact us for detailed information about the differences between the models.

 
 
bottom of the page